Workbench VII - Installing the Saw

Finally!  I managed to get the circular saw bolted to the plate.  I cut two slots - one at 90deg and one at 45deg.

Table saw of death - highest point

Changing the depth is pretty easy

Underneath - switch on with a zip tie

When I put it in, I realised that the cord pushes into one of the metal cross beams on the base.  I might get away with it, but it makes putting it in tricky and I think it might cause wear on the cord, so I'll probably borrow an angle grinder and cut a piece out for it to fit.

Cord obstruction

Next, I need to work out a fence solution.  :)